Padarsey 7 Inch Monitor HDMI – 1024×600 HD TFT LCD Screen Display AV VGA Input Built in Speaker for Raspberry Pi 3 Model B+ 3B CCTV Computer PC DVR Car

Specifications
-Screen size: 7 inch Display
-Ration: 16:9/4:3 adjustable
-Display Component: Color TFT-L
-Resolution: 1024*600 Pixels
-Support adjust the brightness, contrast, color
-Input Signal: PC(VGA),AV1,AV2,HDMI
-Power: DC 12V
-Consumption: 6W
-Video: two way video input
-Frequency: PAL/NTSC
-Rear watching: image can be changed left and right
-Operate mode: the key operation and remote control
-Automatically displays blue screen when no signal
-Parking rearview priority
-Product Dimensions: 174*114*33mm (L*W*D)

Package include
1* 7 inch TFT LCD Screen
1* IR remote controller
1* 12V 1A Power supply
1* power cable(3.3ft lenght)
1* rotatory stand
1* adhesive tape
1* HDMI cable

Product Features

  • 1) Working perfect with CCTV Computer PC Raspberry Pi 3, 2 and Raspberry Pi 1 B B+
  • 2) Easy to use and operate; Comes with an IR remote controller for a easy operation.
  • 3) High-Resolution Picture.Full Color Display.Low Power Consumption
  • 4) Designed with power indicator; earphone, and AV, HDMI, VGA and DC 12V power ports
  • 5) Compatible with CCTV cameras and rearview cameras. Detailed instructions for the display setting in the kit.

For More Information – Click Here

Tagged , , , , , , , , , , , , , . Bookmark the permalink.

2 Responses to Padarsey 7 Inch Monitor HDMI – 1024×600 HD TFT LCD Screen Display AV VGA Input Built in Speaker for Raspberry Pi 3 Model B+ 3B CCTV Computer PC DVR Car

  1. Anonymous says:

    Works well enough. It is Standard Definition, so nothing incredible, but works! I got this to put in my car so passengers could play video games while I listened to music on my stereo. It does the job. it’s obviously a semi-low quality monitor and doesn’t look AMAZING, but can’t be expected with composite signal, but it does do the job which is the important part.P.S. I am using an HDMI to composite converter to accomplish this.I’d buy it again if I needed a cheap monitor for something. The mounting hardware seems pretty decent. Overall a good…

  2. Anonymous says:

    Good monitor but inadequate install instructions. Good monitor but inadequate installation documentation. Does not describe what to do with the BLUE wire. The Red connects to the reverse light 12v connection, the Black connects to ground. If you want the monitor to turn on when you turn on the ignition, connect the Blue wire along with the Red wire to the power supply port. This way you don’t have to turn the monitor on/off manually. It will follow the ignition switch on/off status.If you are unable to adjust the camera up/down,…